ATmega164P Datasheet
时间: 2009-07-26 来源: Seawin
浏览量:
文件类型:
文件大小:
下载次数: picoPower technology AVR Microcontroller.
16-Kbyte self-programming Flash Program Memory, 1-KbyteSRAM, 512-Byte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug.Up to 20 MIPS throughput at 20 MHz.1.8 - 5.5 Volt Operation.
32KB version: ATmega324P
64KB_version: ATmega644P
KeyParameter:
Flash (Kbytes): 16; EEPROM (Kbytes): 0.5; SRAM (Bytes): 1024; Max I/O Pins: 32; F.max (MHz): 20; Vcc (V): 1.8-5.5; 10-bit A/D Channels: 8; Analog Comparator: Yes; 16-bit Timers: 1; 8-bit Timer: 2; Brown Out Detector: Yes; Ext Interrupts: 32; Hardware Multiplier: Yes; Interrupts: 31; ISP: Yes; On Chip Oscillator: Yes; PWM Channels: 6; RTC: Yes; Self Program Memory: Yes; SPI: 1+USART; TWI: Yes; UART: 2; Watchdog: Yes;
GreenPackage TQFP 44 MLF (VQFN) 44 PDIP 40 QFN 44
This Application Note covers the most common EMC problems designers encounter when using Microcontrollers.
This Application Note covers the most common problems encountered when switching to a new microcontroller architecture like the AVR.Solutions and considerations for the most common design challenges are covered.
This Application Note contains files which allow the user to use Register and Bit names from the databook when writing assembly programs.
The purpose of this application note is to guide new users through the initial settings of IAR Embedded Workbench, and compile a simple C-program.
The purpose of this Application Note is to guide new users through the initial settings of the ImageCraft IDE and compile a simple C program.
This Application Note describes how to make a linker command file for use with the IAR ICCA90 C-compiler for the AVR Microcontroller.
Debug Tool: AVR JTAGICE mkII
Design Software: Atmel QTouch Library2.0
Atmel QTouch Library2.0
AVR QTouch Studio 2.0.0
AVR Studio 4
In-System Programming: AVR ISP In-System Programmer
AVRISP mkII In-System Programmer
Starter Kit: ATSTK500
ATSTK600
ATSTK600-DIP
ATSTK600-TQFP44
Software Files: Atmel QTouch Library 2.0
Zip archive with IBIS files for Atmel AVR Mega devices.
AVRsvf is a commandline software that is used to generate Serial Vector Format (SVF) files with complete programming algorithms and content for all Atmel AVR devices with a JTAG interface. SVF files are used as input to most common JTAG programmers or ATE testers.
Introduction of the product range of AVR and AVR32 microcontrollers and application processors:
Device family description
Key features
Device selection guides
Application oriented device families
Tools offer
This white paper highlight some of the challenges of modern microcontroller design and how the new picoPower techniques used in the AVR microcontroller is addressing them.
文章评论
共有 位滨凯科技客人发表了评论 查看完 整内容