ATmega324P automotive Datasheet
时间: 2009-07-26 来源: Seawin
浏览量:
文件类型:
文件大小:
下载次数: 32-Kbyte self-programming Flash Program Memory, 2-KbyteSRAM, 1-KByte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug.Up to 16 MIPS throughput at 16 MHz.2.7 - 5.5 Volt Operation.
See datasheet for automotive ordering codes.
16KB version: ATmega164P Automotive
64KB version: ATmega644P Automotive
Note: all our kits are using industrial product versions.
KeyParameter:
Flash (Kbytes): 32; EEPROM (Kbytes): 1; SRAM (Bytes): 2048; Max I/O Pins: 32; F.max (MHz): 16; Vcc (V): 2.7 - 5.5; 10-bit A/D Channels: 8; Analog Comparator: Yes; 16-bit Timers: 1; 8-bit Timer: 2; Brown Out Detector: Yes; Ext Interrupts: 32; Hardware Multiplier: Yes; Interrupts: 31; On Chip Oscillator: Yes; PWM Channels: 6; RTC: Yes; Self Program Memory: Yes; SPI: 1+USART; TWI: Yes; UART: 2; Watchdog: Yes;
GreenPackage VQFN (Sawn) 44 TQFP 44
This Application Note covers the most common problems encountered when switching to a new microcontroller architecture like the AVR.Solutions and considerations for the most common design challenges are covered.
This application note describes a method to calibrate the internal RC oscillator and targets all AVR devices with tunable RC oscillator. Furthermore, an easily adaptable calibration firmware source code is also offered. This allows device calibration using AVR tools, and it can also be used for 3rd party calibration systems, based on production programmers.
This application note describes a fast and accurate way to calibrate the internal RC oscillator using an external 32.768 kHz crystal as input to an asynchronous Timer/Counter.
This application note describes how to implement a high endurance parameter storage method in Flash memory using the self-programming feature of the AVR.
This application note describes how firmware can be updated securely on AVR microcontrollers with bootloader capabilities. The method includes using the DataEncryption Standard (DES) to encrypt the firmware. This application note also supports the Triple Data Encryption Standard (3DES).
This application note describes some basic routines to interface the AVR to a terminalwindow using the UART (hardware or software).
Debug Tool: ATAVRAUTO102
AVR JTAGICE mkII
Design Software: AVR Studio 4
Evaluation Kit: ATAVRAUTOEK1
In-System Programming: AVR ISP In-System Programmer
AVRISP mkII In-System Programmer
Starter Kit: ATSTK500
ATSTK600
Software Files:
AVRsvf is a commandline software that is used to generate Serial Vector Format (SVF) files with complete programming algorithms and content for all Atmel AVR devices with a JTAG interface. SVF files are used as input to most common JTAG programmers or ATE testers.
Introduction of the product range of AVR and AVR32 microcontrollers and application processors:
Device family description
Key features
Device selection guides
Application oriented device families
Tools offer
文章评论
共有 位滨凯科技客人发表了评论 查看完 整内容