ATmega64M1 Automotive Datasheet
时间: 2009-07-26 来源: Seawin
浏览量:
文件类型：
文件大小：
下载次数: 8-bit AVR Microcontroller with 32-Kbyte self-programming Flash Program Memory, 2-Kbyte SRAM, 1-Kbyte EEPROM, CAN Controller with 6 message-objects, LIN Controller, Power Stage Controller, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation.
KeyParameter:
Flash (Kbytes): 64; EEPROM (Kbytes): 2; SRAM (Bytes): 4096; Max I/O Pins: 27; F.max (MHz): 16; Vcc (V): 2.7 - 5.5; 10-bit A/D Channels: 11; Analog Comparator: 4; 16-bit Timers: Yes; 8-bit Timer: Yes; Brown Out Detector: Yes; Ext Interrupts: 4; Hardware Multiplier: Yes; Interrupts: 31; On Chip Oscillator: Yes; PWM Channels: 4; Self Program Memory: Yes; SPI: Yes; TWI: Yes; UART: 1; Watchdog: Yes;
GreenPackage TQFP 32 VQFN (Sawn) 32
ATmega32C1, ATmega32M1, ATmega64C1, ATmega64M1 Automotive Preliminary Summary (25 pages, revision DS, updated 8/08) ATmega32C1, ATmega32M1, ATmega64C1, ATmega64M1 Automotive (365 pages, revision E, updated 3/09)
AVR286: LIN Firmware Base for LIN/UART Controller(19 pages, revision A, updated 3/08) AVR292: LIN Break-in-Data Feature of LIN/UART Controller(8 pages, revision A, updated 3/08)This document describes the behavior of the LIN/UART Controller when it detects an unanticipated BREAK field during an otherwise normal LIN transfer. This event is what we refer to as "Break-in-Data".
AVR042: AVR Hardware Design Considerations(14 pages, revision F, updated 4/08)This Application Note covers the most common problems encountered when switching to a new microcontroller architecture like the AVR.Solutions and considerations for the most common design challenges are covered.
AVR053: Calibration of the internal RC oscillator(15 pages, revision G, updated 05/06)This application note describes a method to calibrate the internal RC oscillator and targets all AVR devices with tunable RC oscillator. Furthermore, an easily adaptable calibration firmware source code is also offered. This allows device calibration using AVR tools, and it can also be used for 3rd party calibration systems, based on production programmers.
AVR055: Using a 32kHz XTAL for run-time calibration of the internal RC(16 pages, revision D, updated 7/08)This application note describes a fast and accurate way to calibrate the internal RC oscillator using an external 32.768 kHz crystal as input to an asynchronous Timer/Counter.
AVR138: ATmega32M1 family PSC Cookbook(17 pages, revision A, updated 3/08)This application note is an introduction to the use of the Power Stage Controller (PSC) available in ATmega32M1 family. The object of this document is to give a general overview of the PSC, show its various modes of operation and explain how to configure them.
Debug Tool: AVR JTAGICE mkII
Design Software: AVR Studio 4
Starter Kit: ATSTK500
ATSTK524
ATSTK600
ATSTK600-TQFP32
Software Files:
ATmegaxxM1-C1 CAN Library (GCC Compiler) Vector CAN Driver for AVR CAN devices Vector LIN 2.1 Stack for AVR devices AVR and AVR32 - Quick Reference Guide(Overview, 68 pages, revision I, updated 5/09)Introduction of the product range of AVR and AVR32 microcontrollers and application processors:
Device family description
Key features
Device selection guides
Application oriented device families
Tools offer
AVR Instruction Set(User Guide, 155 pages, revision H, updated 7/09) AVR Microcontrollers for Automotive(Brochure, 12 pages, revision F, updated 10/08)
文章评论
共有 位滨凯科技客人发表了评论 查看完 整内容