ATtiny461 Datasheet
时间: 2009-07-26 来源: Seawin
浏览量:
文件类型:
文件大小:
下载次数: 4K Bytes of In-System Self-Programmable Flash, 256 Bytes In-System Programmable EEPROM, 256 Bytes Internal SRAM. One 8/16-bit timer/counter with PWM and prescaler, one 8/10-bit High-speed timer/counter with PWM and separate prescaler, 10-bit ADC, USI-Universal Serial Interface. debugWIRE for on-chip-debug. Up to 20 MIPS throughput at 20 MHz. 1.8 - 5.5 V operation.
2KB version: ATtiny261
8KB_version: ATtiny861
Automotive Version: ATtiny461 Automotive
KeyParameter:
Flash (Kbytes): 4; EEPROM (Kbytes): 0.25; SRAM (Bytes): 256; Max I/O Pins: 16; F.max (MHz): 20; Vcc (V): 1.8 - 5.5; 10-bit A/D Channels: 11; Analog Comparator: Yes; 16-bit Timers: 1; 8-bit Timer: 2; Brown Out Detector: Yes; Ext Interrupts: 2; Interrupts: 19; ISP: Yes; On Chip Oscillator: Yes; PWM Channels: 2; Self Program Memory: Yes; SPI: Yes; TWI: USI; Watchdog: Yes;
GreenPackage MLF (VQFN) 32 PDIP 20 SOIC (300mil) 20
This application note describes how to implement an optoisolated interface for the DebugWIRE. This device could help the debug of applications with non isolated power supply like ballast, motors, vacuum cleaners, refrigerators, etc.
This Application Note covers the most common EMC problems designers encounter when using Microcontrollers.
This Application Note covers the most common problems encountered when switching to a new microcontroller architecture like the AVR.Solutions and considerations for the most common design challenges are covered.
The MC301 is the device board for ATtiny861 AVR® microcontroller which can be connected to the general-purpose power stage board MC300 for driving brushless DC, brushed DC and stepper motors. This board is also designed to be connected on any other driver board which could share the same interface. Power and all signals needed for a power stage board are available on the right side of the board. Jumpers allow demonstrating sensor or sensorless modes of motor control. Finally, interface like USB or Atmel DB101 Display module is also available.
This application note describes how to implement a brushless DC motor control insensorless mode using the ATtiny861 AVR® microcontroller.In this document, we will give a short description of brushless DC motor theory ofoperations, we will detail how to control a brushless DC motor in sensorless modeand we will also give a short description of the ATAVRMC301 and ATAVRMC300boards used in this application note.
This Application Note contains files which allow the user to use Register and Bit names from the databook when writing assembly programs.
Debug Tool: AVR JTAGICE mkII
Design Software: Atmel QTouch Library2.0
Atmel QTouch Library2.0
AVR QTouch Studio 2.0.0
AVR Studio 4
Reference Design: ATAVRBC100
Starter Kit: ATSTK500
ATSTK600
ATSTK600-DIP
Software Files: Atmel QTouch Library 2.0
Zip archive with IBIS files for Atmel AVR Tiny devices.
Introduction of the product range of AVR and AVR32 microcontrollers and application processors:
Device family description
Key features
Device selection guides
Application oriented device families
Tools offer
文章评论
共有 位滨凯科技客人发表了评论 查看完 整内容