H6188P - 340秒 OTP语音芯片

． Built-in 8-bits MCU core (JUPITER).
． Built-in programmable sound generator (PSG)
． Built-in voltage control oscillator with programmable PLL (VCO-PLL clock generator).
． Internal system clock speed up to 45 MHz (max. 45 MHz at Vcc = 3.0V).
． Built-in 8Mbit (1024K Bytes) OTP-ROM.
． Built-in 16Kbit (2048 Bytes) SRAM.
． Equipped 2 EQ-OP for signal amplifier or filter.
． Equipped 1 speaker amplifier ( 0.5W ).
． Built-in 2-wired serial bus interface (I2C like , slave mode).
． Built-in micro-controller interface ( 8-bit parallel interface ).
． Equipped two (Left/Right audio) 16-bit DAC (voltage DAC) audio outputs.
． Operating voltage: 2.40V~3.60V (typ. 3.0V).
． Operating current: 35mA (average operating current without audio load).
． Standby current: typ. 2.0 µA (25°C).

The H6188P series is based on Helios's 8-bit MCU (JUPITER) and equipped with a powerful programmable sound generator (PSG) for processing sweet-sounding. ViaI proprietary system bus, the MCU (JUPITER) features efficient addressing register and memory timing control register (MTR) to access internal/external memory and I/O devices with appropriate timing.
   The H6188P is equipped with two high-resolution 16-bit D/A for audio output, which can support time-sharing mode for processing up to 64-poly sounds. There have beenare many firmware library of speech processing being implemented such as for 4-bit ADPCM, 1-bit WFM, and so on. Since the H6188Phas a built-in PSG, it also provides high quality standard MIDI playing library.
   The H6188P features 24 general purpose I/O pins. Each can be individually programmed to input or output mode, and with internal pull-up or not. Each I/O of port 0 can be programmed to select interrupt source and the interrupt signal can be falling or rising trigger.
   The H6188P features VCO and PLL to provide system clock. The frequency of the system clock is programmable and up to 45 MHz. The device has two built-in 8-bit timers. Each timer is made up of an 8-bit up counter, 8-bit reload data, and pre-scaler. Usually, the timer can be used to configured to speech sampling frequency. The H6188P also supports two device interfaces: one is 2-wired serial bus, and the other is 8-bit parallel MCU control interface.The H6188P acts as a slave device and is able to communicates withto the external host controller by either of the two interfaces.